Disponibilidad: En existencias
Chain Driven CamAllow you to upgrade your 99-06 Twin Cam (except 06 Dyna Glide) to the newer roller-style cam chains and replaces the spring tension cam chain adjusters with the later-style hydraulic adjusters for longer life Cam grinds listed are designed to be used with stock lifters; they require the installation of a 07-17 cam plate, oil pump, cam sprockets and chains, and both hydraulic chain adjusters (these parts are not included and must be purchased separately) A list of required components is supplied with each set of cams Performance should be similar to earlier bikes with the same cam grinds Made in the U.S.A. 99-06 Twin Cam motors (except 06 Dyna Glide) cannot use the 07-17 cams, as the bearing journal on the earlier motors is .875" in diameter and the 07-17 cams are 1.000" in diameter. The "N" series of cams feature the .875" bearing journal, yet still accept the new style cam support plate 99-01 model motors must use the Andrews rear cam sprocket Drag part #0925-0147. 2002-2006 models must use the stock rear cam sprocket, OEM #25728-06 Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance Bolt-in cams with the same output as the stock camsSlight power increase when compared to stockNo returning of the stock system is necessary Can be used with stock valve springs and tappets
Disponibilidad | Disponible |
---|---|
Marca | Desde 1972, Andrews Products ha proporcionado soluciones de ingeniería para el diseño y la fabricación de árboles de levas, taqués, engranajes de transmisión y piezas relacionadas para los productos Harley-Davidson, ofreciendo una calidad y fiabilidad excepcionales con piezas fabricadas 100% en los Estados Unidos. |
Parts infos | Temps d'ouverture d'échappement: 222° Levée de soupape d'échappement: 0,489" 09250139" Levée de soupape d'admission: 0,489" 09250139" Échappement fermé: 2° Échappement ouvert: 40° Admission fermée: 34° Admission ouverte: 2° Caractéristiques: Peut être utilisé avec les ressorts et poussoirs d'origine. Type: Chaîne Unités: Paire Nom de produit: Kit arbre à cames Levée de soupape d'échappement au point mort: 0,095" 09250139" Arbre à cames d’échappement: 109° Arbre à cames d’admission: 106° Levée de soupape d'admission au point mort: 0,091" 09250139" EXHAUST LIFT AT TDC IMPERIAL: 0.095" 09250139" INTAKE OPEN IMPERIAL: 2° INTAKE CLOSE IMPERIAL: 34° INTAKE LIFT IMPERIAL: 0.489" 09250139" EXHAUST CLOSE IMPERIAL: 2° EXHAUST LOBE CENTERLINE IMPERIAL: 109° INTAKE LOBE CENTERLINE IMPERIAL: 106° |
---|---|
Referencia del fabricante | 216812 |
Embalaje | Paire |