Disponibilidad: En existencias
Chain Driven CamAllow you to upgrade your 99-06 Twin Cam (except 06 Dyna Glide) to the newer roller-style cam chains and replaces the spring tension cam chain adjusters with the later-style hydraulic adjusters for longer life Cam grinds listed are designed to be used with stock lifters; they require the installation of a 07-17 cam plate, oil pump, cam sprockets and chains, and both hydraulic chain adjusters (these parts are not included and must be purchased separately) A list of required components is supplied with each set of cams Performance should be similar to earlier bikes with the same cam grinds Made in the U.S.A. 99-06 Twin Cam motors (except 06 Dyna Glide) cannot use the 07-17 cams, as the bearing journal on the earlier motors is .875" in diameter and the 07-17 cams are 1.000" in diameter. The "N" series of cams feature the .875" bearing journal, yet still accept the new style cam support plate 99-01 model motors must use the Andrews rear cam sprocket Drag part #0925-0147. 2002-2006 models must use the stock rear cam sprocket, OEM #25728-06 Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance Bolt-in cams for low RPM torque and two-up touring Add more torque and horsepower at low and middle RPM range (1800-5200 RPM)Can be used with stock valve springs and tappets
Disponibilidad | Disponible |
---|---|
Marca | Desde 1972, Andrews Products ha proporcionado soluciones de ingeniería para el diseño y la fabricación de árboles de levas, taqués, engranajes de transmisión y piezas relacionadas para los productos Harley-Davidson, ofreciendo una calidad y fiabilidad excepcionales con piezas fabricadas 100% en los Estados Unidos. |
Parts infos | Temps d'ouverture d'échappement: 230° Levée de soupape d'échappement: 0,490" 09250141" Levée de soupape d'admission: 0,490" 09250141" Échappement fermé: 4° Échappement ouvert: 44° Admission fermée: 37° Admission ouverte: 11° Caractéristiques: Peut être utilisé avec les ressorts et poussoirs d'origine. Type: Chaîne Unités: Paire Nom de produit: Kit arbre à cames Levée de soupape d'échappement au point mort: 0,120" 09250141" Arbre à cames d’échappement: 106° Arbre à cames d’admission: 102° Levée de soupape d'admission au point mort: 0,138" 09250141" EXHAUST LIFT AT TDC IMPERIAL: 0.120" 09250141" INTAKE OPEN IMPERIAL: 11° INTAKE CLOSE IMPERIAL: 37° INTAKE LIFT IMPERIAL: 0.490" 09250141" EXHAUST CLOSE IMPERIAL: 4° EXHAUST LOBE CENTERLINE IMPERIAL: 106° INTAKE LOBE CENTERLINE IMPERIAL: 102° |
---|---|
Referencia del fabricante | 216826 |
Embalaje | Paire |