Disponibilidad: En existencias
Chain Driven CamAllow you to upgrade your 99-06 Twin Cam (except 06 Dyna Glide) to the newer roller-style cam chains and replaces the spring tension cam chain adjusters with the later-style hydraulic adjusters for longer life Cam grinds listed are designed to be used with stock lifters; they require the installation of a 07-17 cam plate, oil pump, cam sprockets and chains, and both hydraulic chain adjusters (these parts are not included and must be purchased separately) A list of required components is supplied with each set of cams Performance should be similar to earlier bikes with the same cam grinds Made in the U.S.A. 99-06 Twin Cam motors (except 06 Dyna Glide) cannot use the 07-17 cams, as the bearing journal on the earlier motors is .875" in diameter and the 07-17 cams are 1.000" in diameter. The "N" series of cams feature the .875" bearing journal, yet still accept the new style cam support plate 99-01 model motors must use the Andrews rear cam sprocket Drag part #0925-0147. 2002-2006 models must use the stock rear cam sprocket, OEM #25728-06 Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance Maximum torque and horsepower RPM ranges (2600-6200+ RPM)Designed for engines with 9.8:1 to 10.2:1 compression ratioCoil bind should be checked; can be used with stock tappets (minimum valve travel of .620")Piston-to-valve and valve-to-valve clearance must be checked
Disponibilidad | Último artículo en stock |
---|---|
Marca | Desde 1972, Andrews Products ha proporcionado soluciones de ingeniería para el diseño y la fabricación de árboles de levas, taqués, engranajes de transmisión y piezas relacionadas para los productos Harley-Davidson, ofreciendo una calidad y fiabilidad excepcionales con piezas fabricadas 100% en los Estados Unidos. |
Parts infos | Temps d'ouverture d'échappement: 252° Levée de soupape d'échappement: 0,550" 09250146" Levée de soupape d'admission: 0,550" 09250146" Échappement fermé: 20° Échappement ouvert: 52° Admission fermée: 46° Admission ouverte: 22° Caractéristiques: Peut être utilisé avec les ressorts et poussoirs d'origine. Type: Chaîne Unités: Paire Nom de produit: Kit arbre à cames Levée de soupape d'échappement au point mort: 0,181" 09250146" Arbre à cames d’échappement: 106° Arbre à cames d’admission: 102° Levée de soupape d'admission au point mort: 0,197" 09250146" EXHAUST LIFT AT TDC IMPERIAL: 0.181" 09250146" INTAKE OPEN IMPERIAL: 22° INTAKE CLOSE IMPERIAL: 46° INTAKE LIFT IMPERIAL: 0.550" 09250146" EXHAUST CLOSE IMPERIAL: 20° EXHAUST LOBE CENTERLINE IMPERIAL: 106° INTAKE LOBE CENTERLINE IMPERIAL: 102° |
---|---|
Referencia del fabricante | 216855 |
Embalaje | Paire |