andrews
ANDREWS SPORTSTER EVOLUTION CAMS
Andrews has a number of performance cam designs for Evolution Sportster engines. All the cams listed will run to 6500 RPM with stock hydraulic lifters. Since the stock lifters are such proven units, we continue to recommend that they not be changed to solids. Andrews Evolution Sportster cams have stock base circle sizes so stock (non-adjustable) pushrods can be used (except for V9 or BV cams). Adjustable aluminum or chrome-moly steel pushrods are also available as shown (fixed length for 1991). The no. 2 (36 teeth) cam drive gear used in 2000 to present models is not the same as in 1991 thru 1999 models. For this reason separate part numbers are listed for 2000 to present models.
Note: 1991 Sportster engines are considerably different than earlier Evolution Sportsters. Cam gears for earlier Evolution Sportsters will not fit 1991 thru 1999 engines. Year 2000 and later models use a different no. 2 cam drive gear as 1991 thru 1999 models. For these reasons different part numbers are listed.2004 and later models have different valve stem diameter and valve springs, installation of cams with more than .515" lift may need different valves, springs and collars.
Availability: In stock
Quick overview:
The following two grinds were originally designed for the Iron Sportster, Andrews altered the lobes shapes with the correct timing for the different roller diameter and rocker ratio. They are proven cam designs and produce lots of usable power for larger Evolution Sportster engines.
V9/N9 CAM KIT
Medium lift cams for stroked engines from 80 to 88 cubic inches. Broad torque range to 6000+ RPM with hydraulic lifters, Andrews springs collars and pushrods required (1991 to present models need long pushrods).
ANDREWS SPORTSTER EVOLUTION CAMS
Andrews has a number of performance cam designs for Evolution Sportster engines. All the cams listed will run to 6500 RPM with stock hydraulic lifters. Since the stock lifters are such proven units, we continue to recommend that they not be changed to solids. Andrews Evolution Sportster cams have stock base circle sizes so stock (non-adjustable) pushrods can be used (except for V9 or BV cams). Adjustable aluminum or chrome-moly steel pushrods are also available as shown (fixed length for 1991). The no. 2 (36 teeth) cam drive gear used in 2000 to present models is not the same as in 1991 thru 1999 models. For this reason separate part numbers are listed for 2000 to present models.
Note: 1991 Sportster engines are considerably different than earlier Evolution Sportsters. Cam gears for earlier Evolution Sportsters will not fit 1991 thru 1999 engines. Year 2000 and later models use a different no. 2 cam drive gear as 1991 thru 1999 models. For these reasons different part numbers are listed.2004 and later models have different valve stem diameter and valve springs, installation of cams with more than .515" lift may need different valves, springs and collars.
Availability | Special order (contact us for lead time) |
---|---|
Brand | Founded in 1972, Andrews Products is recognized worldwide as a designer and manufacturer of high-quality, durable performance upgrades for the motorsports industry. With state-of-the-art engineering and cutting-edge technologies, Andrews Products offers superior-quality motorcycle camshafts, transmission gears, and related valve gear parts for street and racing bikes alike. The brand started making transmission gears and shafts over 40 years ago. Since that time, a wide variety of gear sets with better ratios has been introduced. These tune-ups easily outperform anything else available. Andrews Products is committed to providing top-notch products that will keep speed adrenaline junkies in the winner’s circle, year after year. |
Manufacturer's reference | 214219 |
---|