Disponibilidad: En existencias
Chain Driven CamAllow you to upgrade your 99-06 Twin Cam (except 06 Dyna Glide) to the newer roller-style cam chains and replaces the spring tension cam chain adjusters with the later-style hydraulic adjusters for longer life Cam grinds listed are designed to be used with stock lifters; they require the installation of a 07-17 cam plate, oil pump, cam sprockets and chains, and both hydraulic chain adjusters (these parts are not included and must be purchased separately) A list of required components is supplied with each set of cams Performance should be similar to earlier bikes with the same cam grinds Made in the U.S.A. 99-06 Twin Cam motors (except 06 Dyna Glide) cannot use the 07-17 cams, as the bearing journal on the earlier motors is .875" in diameter and the 07-17 cams are 1.000" in diameter. The "N" series of cams feature the .875" bearing journal, yet still accept the new style cam support plate 99-01 model motors must use the Andrews rear cam sprocket Drag part #0925-0147. 2002-2006 models must use the stock rear cam sprocket, OEM #25728-06 Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance Bolt-in cams with more torque at low and middle RPM range (1700-4800 RPM)Similar to EV23 for heavy bikes Ideal for heavy bikes with stock compression ratios and stock pistonsCan be used with stock valve springs and tappets
Disponibilidad | Disponible |
---|---|
Marca | Desde 1972, Andrews Products ha proporcionado soluciones de ingeniería para el diseño y la fabricación de árboles de levas, taqués, engranajes de transmisión y piezas relacionadas para los productos Harley-Davidson, ofreciendo una calidad y fiabilidad excepcionales con piezas fabricadas 100% en los Estados Unidos. |
Parts infos | Temps d'ouverture d'échappement: 228° Levée de soupape d'échappement: 0,498" 09250140" Levée de soupape d'admission: 0,498" 09250140" Échappement fermé: 8° Échappement ouvert: 40° Admission fermée: 30° Admission ouverte: 10° Caractéristiques: Peut être utilisé avec les ressorts et poussoirs d'origine. Type: Chaîne Unités: Paire Nom de produit: Kit arbre à cames Levée de soupape d'échappement au point mort: 0,121" 09250140" Arbre à cames d’échappement: 106° Arbre à cames d’admission: 100° Levée de soupape d'admission au point mort: 0,134" 09250140" EXHAUST LIFT AT TDC IMPERIAL: 0.121" 09250140" INTAKE OPEN IMPERIAL: 10° INTAKE CLOSE IMPERIAL: 30° INTAKE LIFT IMPERIAL: 0.498" 09250140" EXHAUST CLOSE IMPERIAL: 8° EXHAUST LOBE CENTERLINE IMPERIAL: 106° INTAKE LOBE CENTERLINE IMPERIAL: 100° |
---|---|
Referencia del fabricante | 216821 |
Embalaje | Paire |